Boeing 737
FMC
£200 each
£350 for two
FMC 3D Printed Parts, and they are NOT Backlit.
5 inch Screen
The Back of the FMC
__________________________
3D Printing the FMC/CDU
FMC Body - Total Print Time: 48 Hours, 179g PLA
FMC Buttons - Total Print Time: 17 Hours, 58g PLA
Boeing 737
EFIS
£100 each
£150 for two
EFIS 3D Printed Parts, and they are NOT Backlit.
______________________________
Building a Boeing 737
Boeing 737
MCP
£300 each
1x MCP, 2x CDU, 2x EFIS £800
If nobody is interested, I will put them on eBay for £1,000
They all should be finished as soon as SimVimX is working.
1st April 2022
SimVimX is still not working properly.
MCP 3D Printed Parts, and they are NOT Backlit.
3-Digit & 6-Digit WHITE 7-Segment Displays
Large Square Green LED Push Buttons
Boeing 737
Cockpit
Click on Image to enlarge
Boeing 737 Home Simulators
Heli Mech (Very Good)
Sim Build UK (Very Good)
_______________________________
Building a Boeing 737 Simulator
sim build uk - Setting up FMC/CDU Display
using Air Manager
737sim.dk - Setting up MIP
(Main Instrument Panels) Displays
_______________________________
Boeing 737 Websites
_______________________________
Boeing 737 Parts
_______________________________
Boeing 737 Desktop Panel from New Concept
£16,760 + P&P
Click on Image for a larger view
_______________________________
My First Home Built MCP
My First Home Built FMC/CDU
__________________________________
Wesley's Boeing 737
Flight Simulator
_____________________________________________________________________________________________________________________________________________________
Wesley's Page